Building your own home is an experience you will remember forever. There is however, a right way, and a wrong way. As you build your home there are several steps that need to be taken. These steps need to be planned out so they do not create pitfalls.
The House Designers understands how exciting it is to build a new home! In an effort to make the process easier, we have put together this step-by-step home building guide to help you understand the different building phases and how it all comes together.
1 FOUNDATION: The foundation of your home is a critical element in the building process because it is what holds up the entire structure. Constructed correctly it prevents future problems that can affect your home’s safety and efficiency. After the ground is excavated, forms will be built with framing lumber (you can clean and reuse for framing) and then concrete is poured into each section. You’ll need to decide what type of foundation you want — basement, slab or crawlspace. After the foundation has set (approximately one week) and the form boards are removed, the framing of the home begins and it’s at this point you can start to see the layout of your new home take shape!
2 FRAMING: After the foundation is poured and set, the form boards are removed and framing of the house begins. Just as much as our skeleton serves as the structure for our bodies, the frame of a house is the underlying structure of the home. As the framing progresses, you will see the layout of your home unfold, and you’ll be able to identify different rooms, doorways, and windows. If your home seems smaller than you imagined at this point, don’t panic. It is simply an illusion!
3 INSPECTIONS & FRAME WALK: Inspections are a very important part of the home construction process and ensures that every element of construction is done correctly. After the initial inspections, your builder will ask you to walk through your home. At this point you can visualize what your dream home will look like since the walls and trusses will be framed and the roof sheathing will be installed. A framing inspection is next!
4 HOUSE WRAP: Certain climates offer a higher risk of moisture, which can cause mold and wood rot occurring in the home. Therefore, a protective barrier known as a house wrap is installed to prevent the structure of your home and its interior from getting wet, moldy or rotting. The house wrap ensures that all moisture will remain outside the home.
5 ENCLOSING YOUR HOME: Once framing has passed inspection, your builder will begin enclosing your home and install exterior sheathing, shingles, the roofing system and the windows and doors. Since windows and doors are one of the most visible features of your home inside and out, you’ll want to carefully select the perfect doors and windows. Make sure your windows have the performance, durability and …